| CODE NO. | NAME |
| 1001-A | Tripple Reamer |
| 1001-B | Tap |
| 1001-C | Introducer |
| 1001-D | Angle Guide |
| 1001-E | Impactor |
| 1001-F | Bearrer Guide |
| 1001-G | Guide Wire |
| 1001-H | Box |
D.H.S. PLATE INSTRUMENT SET
(FIX TYPE)
D.H.S. PLATE INSTRUMENT SET
(Q.C. TYPE)
| CODE NO. | NAME |
| 1002-A | T. Handle |
| 1002-B | D.H.H. Reamer |
| 1002-C | D.C.S. Reamer |
| 1002-D | Tap |
| 1002-E | Angle Guide |
| 1002-F | Fix Angle Guide (1300 |
| 1002-G | Fix Angle Guide (1350) |
| 1002-H | Introducer Sleeve |
| 1002-I | Tap Sleeve |
| 1002-J | Introducer with Barrel Guide |
| 1002-K | Nylon Faced Impector |
| 1002-L | Direct Measuring Device |
| 1002-M | Guide Wire (2.5 mm) |
| 1002-N | Box |
HERBERT SCREW INSTRUMENT SET
| CODE NO. | NAME |
| 1003-A | Cannualated Screw Driver |
| 1003-B | Cannualated Tap (3.5 mm) |
| 1003-C | Cannualated Tap (4.5 mm) |
| 1003-D | Cannualated Drill Bit (2.7 mm) |
| 1003-E | Cannualated Drill Bit (3.2 mm) |
| 1003-F | Screw Measuring Device |
| 1003-G | Screw Holding Forcep |
| 1003-H | Guide Wire (1.0 mm) |
| 1003-I | Box |
MODULAR BIPOLAR HIP PROSTHESIS INSTRUMENT SET
| CODE NO. | NAME |
| 1004-A | Rasp (S/M/L) with Rod |
| 1004-B | Reamer |
| 1004-C | Murphy Skid |
| 1004-D | Punch |
| 1004-E | C-Retractor with 2 Hooks |
| 1004-F | Head Extractor |
| 1004-G | Gauge Scale |
| 1004-H | Nylon Faced Impactor |
| 1004-I | Box Chisel |
| 1004-J | Ex. Assembly |
| 1004-K | Stem Introducer |
| 1004-L | Restrictor Handle |
| 1004-M | Trial Head (37 mm to 55 mm) |
| 1004-N | Trial Neck (S,M,L) |
| 1004-O | Trial Stem (S,M,L) |
| 1004-P | Cement Nozzel |
| 1004-Q | Cement Gun |
| 1004-R | Cement Restractor |
INTERLOCKING NAIL INSTRUMENT SET
(HUMERUS)
| CODE NO. | NAME |
| 1005-A | Zig |
| 1005-B | Conical Bolt |
| 1005-C | Main Sleeve |
| 1005-D | Drill Sleeve |
| 1005-E | Trocar Point |
| 1005-F | Tommy Bar |
| 1005-G | Depth Gauge |
| 1005-H | Square Awl |
| 1005-I | Screw Driver (3.5 mm) |
| 1005-J | Screw Driver (4.5 mm) |
| 1005-K | T. Spanner |
| 1005-L | Simple Spanner |
| 1005-M | D.H. Device |
| 1005-N | Compression Unit |
| 1005-O | Compression Sleeve |
| 1005-P | Extractor Rod |
| 1005-Q | Extractor Handle |
| 1005-R | Round Hammer |
| 1005-S | Drill Bit (2.2 mm x 9” Long) |
| 1005-T | Drill Bit (2.7 mm x 9” Long) |
| 1005-U | Guide Wire (2.0 mm x 24” Long) |
ENDERS NAIL INSTRUMENT SET
| CODE NO. | NAME |
| 1006-A | Nail Introducer |
| 1006-B | Bone Awl |
| 1006-C | Final Punch |
| 1006-D | Flat Hammer |
| 1006-E | Simple Hammer |
| 1006-F | Nail Bender |
| 1006-G | Nail Extractor |
| 1006-H | Plate Type Bender |
INTERLOCKING NAIL INSTRUMENT SET
(HUMERUS)
| CODE NO. | NAME |
| 1005-A | Zig |
| 1005-B | Conical Bolt |
| 1005-C | Main Sleeve |
| 1005-D | Drill Sleeve |
| 1005-E | Trocar Point |
| 1005-F | Tommy Bar |
| 1005-G | Depth Gauge |
| 1005-H | Square Awl |
| 1005-I | Screw Driver (3.5 mm) |
| 1005-J | Screw Driver (4.5 mm) |
| 1005-K | T. Spanner |
| 1005-L | Simple Spanner |
| 1005-M | D.H. Device |
| 1005-N | Compression Unit |
| 1005-O | Compression Sleeve |
| 1005-P | Extractor Rod |
| 1005-Q | Extractor Handle |
| 1005-R | Round Hammer |
| 1005-S | Drill Bit (2.2 mm x 9” Long) |
| 1005-T | Drill Bit (2.7 mm x 9” Long) |
| 1005-U | Guide Wire (2.0 mm x 24” Long) |
ENDERS NAIL INSTRUMENT SET
| CODE NO. | NAME |
| 1006-A | Nail Introducer |
| 1006-B | Bone Awl |
| 1006-C | Final Punch |
| 1006-D | Flat Hammer |
| 1006-E | Simple Hammer |
| 1006-F | Nail Bender |
| 1006-G | Nail Extractor |
| 1006-H | Plate Type Bender |
INTERLOCKING NAIL INSTRUMENT SET
(TIBIA & FEMUR)
| CODE NO. | NAME |
| 1007-A | Zig |
| 1007-B | Conical Bolt |
| 1007-C | Main Sleeve |
| 1007-D | Drill Sleeve |
| 1007-E | Trocar Point |
| 1007-F | Tommy Bar |
| 1007-G | Depth Gauge |
| 1007-H | Awl |
| 1007-I | Taplane Tube |
| 1007-J | Screw Driver |
| 1007-K | T. Spanner |
| 1007-L | Simple Spanner |
| 1007-M | D.H. Device |
| 1007-N | D.H. Attachment |
| 1007-O | Nut |
| 1007-P | Extractor Rod |
| 1007-Q | Extractor Handle |
| 1007-R | Round Hammer |
| 1007-S | Tissue Protector |
| 1007-T | Drill Bit (4.0 mm x 9″ Long) |
| 1007-U | Drill Bit (3.2 mm x 9″ Long) |
| 1007-v | Guide Wire |
I.M.S.C. NAIL INSTRUMENT SET
| CODE NO. | NAME |
| 1008-A | Zig |
| 1008-B | Conical Bolt |
| 1008-C | Distal Device |
| 1008-D | Device Attach Bolt |
| 1008-E | Main Sleeve |
| 1008-F | Drill Sleeve (4.0 mm) |
| 1008-G | Drill Sleeve (6.5 mm) |
| 1008-H | Trocar Point |
| 1008-I | Tommy Bar |
| 1008-J | Depth Gauge |
| 1008-K | Awl |
| 1008-L | Screw Drive |
| 1008-M | T. Spanner |
| 1008-N | Simple Spanner |
| 1008-O | D.H. Device |
| 1008-P | Extractor Rod |
| 1008-Q | Extractor Handle |
| 1008-R | Round Hammer |
| 1008-S | Drill Bit (4.0 mm x 9″ Long) |
| 1008-T | Drill Bit (4.5 mm x 9″ Long) |
| 1008-U | Guide Wire |
PROXIMAL FEMUR NAIL INSTRUMENT SET
| CODE NO. | NAME |
| 1009-A | Zig (1300 or 1350) |
| 1009-B | Conical Bolt |
| 1009-C | Main Sleeve (8.0 mm) |
| 1009-D | Main Sleeve (6.4 mm) |
| 1009-E | Drill Sleeve (4.0 mm) |
| 1009-F | Drill Sleeve (5.5 mm) |
| 1009-G | Guide Wire Sleeve (8.0 mm) |
| 1009-H | Guide Wire Sleeve (6.4 mm) |
| 1009-I | Screw Driver (6.4 mm) |
| 1009-J | Screw Driver (8.0 mm) |
| 1009-K | D.H. Device |
| 1009-L | D.H. Attachment |
| 1009-M | Nut |
| 1009-N | Solapur Sleeve |
| 1009-O | T. Spanner |
| 1009-P | Simple Spanner |
| 1009-Q | Step Reamer (8.0 mm) |
| 1009-R | Step Reamer (6.4 mm) |
| 1009-S | Entry Reamer (Q.C.) |
| 1009-T | Depth Gauge |
| 1009-U | Trocar Point |
| 1009-V | Extractor Rod |
| 1009-W | Extractor Handle |
| 1009-X | Round Hammer |
| 1009-Y | Awl (Cannulated) |
| 1009-Z | Q.C.T. Handle |
| 1009-AA | Drill Bit (4.0 mm x 9″ Long) |
| 1009-BB | Drill Bit (5.5 mm) |
| 1009-CC | Tommy Bar |
| 1009-DD | Guide Wire (2.0 mm x 15″ Long) |
| 1009-EE | Guide Wire (2.5 mm x Ex. Long) |
ELASTIC NAIL INSTRUMENT SET
| CODE NO. | NAME |
| 1010-A | Introducer with Chuck & Key |
| 1010-B | Extractor Rod |
| 1010-C | Introducer |
| 1008-D | Final Punch |
| 1010-E | Reduction Device |
| 1010-F | Reduction Device Rod |
| 1010-G | Awl (Curved) |
| 1010-H | Awl (Straight) |
| 1010-I | Flat Hammer |
| 1010-J | Jumbo Cutter |
SPINE INSTRUMENT SET
| CODE NO. | NAME |
| 1011-A | Mono Screw Driver |
| 1011-B | Poly Screw Driver |
| 1011-C | T. Handle (Q.C.) |
| 1011-D | Candle, Sound Probe |
| 1011-E | Bone Tap (4.5 mm,5.5 mm, 6.5 mm) |
| 1011-F | Reduction Screw Tap Remover |
| 1011-G | Stepple Holder |
| 1011-H | Screw Holder |
| 1011-I | Rod Holder (5.5 mm & 3.0 mm) |
| 1011-J | Rod Bender |
| 1011-K | Close Rod Pusser |
| 1011-L | Open Rod Pusser |
| 1011-Q | Screw Driver |
| 1011-R | Inni Screw Driver |
| 1011-S | Awl |
| 1011-T | Final Tightner |
| 1011-U | Probe (Cruved) |
| 1011-V | Probe (Straight) |
| 1011-W | Vice Grip |
| 1011-X | Compression angle |
| 1011-Y | Distractor Angle |
| 1011-Z | Heavy Rod |
| 1011-AA | Bender |
| 1011-BB | Cement Restictor |
ANTERIOR CERVICAL PLATE INSTRUMENT SET
| CODE NO. | NAME |
| 1012-A | T. Handle |
| 1012-B | Self Holding Screw Driver |
| 1012-C | Drill Guide |
| 1012-D | Plate Holding Forcep |
| 1012-E | Loc. Screw holding Driver |
| 1012-F | Qurette (3.0 mm) |
| 1012-G | Adjustable Cervical Distractor |
| 1012-H | Plate Holding Forcep |
| 1012-I | Drill Bit |
| 1012-J | Distraction Screw Holder |
| 1012-K | Fixation Pin Holder |
| 1012-L | Distraction Screw |
| 1012-M | Fixation Pin |
| 1012-N | Bone Tap |
EXPANDABLE CAGE INSTRUMENT SET
| CODE NO. | NAME |
| 1013-A | Cage Rotator (Straight) |
| 1013-B | Cage Rotator (Cruved) |
| 1013-C | Cage Holder |
| 1013-D | Top Screw Driver |
| 1013-E | Cage Pusser (Straight) |
| 1013-F | Cage Pusser (Curved) |
| 1013-G | Graphting Punch |
CAGE INSTRUMENT SET
(KIDNEY, PLIF, TLIF)
| CODE NO. | NAME |
| 1014-A | T. Handle |
| 1014-B | Graphting Pad |
| 1014-C | Chissel (7 mm to 12 mm) |
| 1014-D | Cage Introducer with Barrer Guide |
| 1014-E | Sizer (7 mm to 12 mm) |
| 1014-F | Graphting Punch |
| 1014-G | Zinkle Curet (Curved) |
| 1014-H | Zinkle Curet (Straight) |
| 1014-I | Cage Pusser (Straight) |
| 1014-J | Cage Pusser (Curved) |
| 1014-K | Square Curet (curved) |
| 1014-L | Square Curet (Straight) |
EXPERT TIBIA NAIL INSTRUMENT SET
| CODE NO. | NAME |
| 1015-A | Zig |
| 1015-B | Conical Bolt |
| 1015-C | Main Sleeve |
| 1015-D | Drill Sleeve |
| 1015-E | Trocar Point |
| 1015-F | Tommy Bar |
| 1015-G | Depth Gauge |
| 1015-H | Awl |
| 1015-I | Taplane Tube |
| 1015-J | Screw Driver |
| 1015-K | T. Spanner |
| 1015-L | Simple Spanner |
| 1015-M | D. H. Device |
| 1015-N | Extractor Rod |
| 1015-O | ST. Pin |
| 1015-P | Ex. Handle |
| 1015-Q | R. Hammer |
| 1015-R | Drill Bit (3.2 mm & 4.0 mm) |
| 1015-S | Guide Wire |